Tuesday the 14th - copyright Konsorcjum Andziak - HostingFlow.com

116.81
Machine for hoof hooves
 
Overall dimensions:
  • depth - 420 mm;
  • width - 980 mm;
  • height - 1.120 mm.

Technical data:

  • Motor - gearbox - 2x 0,75kW / 60 U/min.;
  • Separate motors for top and bottom rolls;
  • Made of stainless steel;
  • Cross-cutting work of the hooves that pull the hooves;
  • Rolls rotations - right/left;
  • Rolls working width - 420 mm;
  • Control - foot pedals.
  • Clogging hooves - at once only from one beef foot.

116 81 k

116 81a k

116 81b k


116.80
Wywrotnica do wózków cimbera - jako urządzenie napędzane z maszyny, z którą współpracuje ( np. kuter, wilk, mieszałka, itp.)
 
Wymiary gabarytowe całkowte:
  • Długość - 1.800 mm;
  • Szerokośc - 800 mm;
  • Wysokość - 1.112 mm w stanie jak na zdjęciu (regulacja do 50 mm);

Dane techniczne:

  • Wysyp - szerokość :Długośc wysypu - 570 mm;
    • przy wejściu - 780 mm;
    • przy wyjściu - 520 mm.
  • Głębokość wysypu - do 1.200 mm;
  • Urządzenie główne musi posiadać napęd hydrauliczny, napędzający siłownik hydrauliczny wywrotnicy.

116 80 k

116 80a k

116 80b k


116.79
Slit filter
 
Overall dimensions:
  • length - 1.200 mm;
  • width - 1.000 mm;
  • height - 1.370 mm.

Technical data:

  • Drum dimensions:
    • width - 600 mm;
    • diameter - Ø 650 mm;
    • Przekrój na wejściu i wyjściu - Ø - 215 mm.
       

116 79 k


 116.78
Palette-boxes tippler, hydraulic, stainless steel (brand new)
 
Overall dimensions:
  • depth - 1.900 mm;
  • width - 1.750 mm;
  • height - 1.750 mm.

Technical data:

  • capacity - up to 600 kg;
  • palette-box dimensions - 1.000 x 1.200 x 1.050;
  • hydraulic unit;
  • motor - 1,1 kW/1.400 U/min.;
  • 2 hydraulic actuators;
  • made of stainless steel.

116 78 k

116 78a k

116 78b k

116.77
Drum slot filter - external flow
 
Overall dimensions:
  • width - 1.040 mm;
  • depth - 980 mm;
  • height - 755 mm;

Technical data:

  • drum diameter - 450 mm;
  • drum width - 570 mm.


116.76

 Stainless steel smoking trolleys type H

Overall dimensions:

  • length - 1.000 mm;
  • width - 1.000 mm;
  • height - 1.950 mm.
si

ssss

kk

116.75
Stainless steel screw and hydraulic lift platforms

Screw platforms overall dimensions:

  • platform length - 1.530 mm;
  • pole width - 370 mm;
  • platform width - 760 mm;
  • height - 2.600 mm;
  • barrier height - 1.070 mm;
  • lifting height - 200-2.100 mm.

Hydraulic platforms overall dimensions:

  • platform length - 800 mm;
  • basement length - 900 mm;
  • pole width - 900 mm;
  • platform width - 800 mm;
  • basement width - 930 mm;
  • height - 2.660 mm;
  • barrier height - 830 mm;
  • lifting height - 500-1.500 mm.
ahk

akj

am

gg

116.74
 Stainless steel screw lift platform with sink and sterizer
  • Platform lifting height - 1.800-2.000 mm.
  • Platform is equipped with foot pedal steering.
  • Platform is equipped with pedal cold/hot water sink (stainless steel).
  • Platform is equipped with electric sterilizer for knives (stainless steel).












116.73
Ham former type „MARLBORO”

Overall dimensions:

  • length - 500 mm;
  • width - 265 mm;
  • height - 325 mm.

Form overall dimensions:

  • length - 485 mm;
  • width - 100mm;
  • height – 60 mm.

Technical data:

4 levels for 2 forms on level.




116.72
Net ham form

Overall dimensions:

  • length - 500 mm;
  • width - 145 mm;
  • height - 210 mm.

Inner form dimensions:

  • length - 450 mm;
  • form Ø – 115 mm.



116.71
Frame saw sterilizer - stainless steel

Overall dimensions:

  • length - 1.000 mm
  • width - 200 mm
  • height - 1.010 mm.

Technical data:

  • made of stainless steel
  • thermoregulator
  • legs for fixing to the floor
  • water feeding and discharge.
63 k

Zdjęcie urządzenia po demontażu


116.70
Stainless steel sink with photocell
Overall dimensions:
  • depth - 430 mm
  • width - 360 mm
  • height- 1.265 mm.
 

116.69

Stainless steel wall sink with photocell

Overall dimensions:

  • length - 470 mm
  • width - 420 mm
  • height - 400 mm

Inner dimensions:

  • length - 360 mm
  • width - 320 mm
  • depth - 130 mm


116.68

Knives bulk sterilizer

Overall dimensions:

  • length - 700 mm
  • width - 320 mm
  • height - 950 mm

Inner dimensions:

  • length - 580 mm
  • width - 300 mm
  • depth - 620 mm

Technical data:

  • Sterilized knives single charge - 30 pcs. (3 rows - 10 pcs. each).

93 k


116.67
Stainless steel 1-chamber pedal sinks

Overall dimensions:

  • height - 1.200 mm;
  • width - 390 mm;

Inner dimensions:

  • length - 360 mm;
  • width - 335 mm;
  • depth - 135 mm.

Technical data:

  • Pedal steering - cold and hot water.
116 67 k
 

116.66
 Stainless steel aprons washers

Size A.

Overall dimensions:

  • length - 850 mm;
  • width - 640 mm;
  • height - 1.650 mm.

116 66a k

Size B.
Overall dimensions:
  • length - 1.100 mm;
  • width - 450 mm;
  • height - 1.900 mm.

116 66b k


116.65

Net filling machine with ham with possibility of foil wrapping - "Nowicki"

Overall dimensions:

  • length - 1.870 mm;
  • width - 445 mm;
  • height - 1.030 mm.

Working table dimensions:

  • length - 1060 mm;
  • width - 42 mm;
  • height - 55 mm.
  • working tube diameter - 100 mm;
  • working tube length - 800 mm;
  • stroke of the piston - 800 mm;
  • length of working feed - 280 mm;

Technical data:

  • pneumatic;
  • piston;
  • working tube diameter - 100 mm;
  • working tube length - 800 mm;
  • stroke of the piston - 800 mm;
  • length of working feed - 280 mm;

116 65 k

116 65a k


116.64
Manual davit/lift

 Overall dimensions:

  • height - 2470 mm;
  • length - 1500 mm;
  • lifting arm length - 900mm.

Technical data:

  • rotation - 3600.

116 64 k


116.63

Sanitary sluice

Overall dimensions:

  • lenth - 3.500 mm
  • width - 830 mm
  • height - 1.230 mm

Technical data:

  • passage width - 550 mm
  • brushes - 2

116 63 k

116 63a k


116.62

Pallete-boxes tippler with bin "Dodman"

Overall dimensions:

  • height - 4.720 mm;
  • depth - 3.100 mm;
  • width - 1.700 mm.

Platform dimensions:

  • width - 1.340 mm;
  • depth - 1.000 mm;
  • maximum height of fed pallete - 2.100 mm.

Bin dimensions:

  • depth - 2.100 mm;
  • width - 1.700 mm;
  • height - 1.780 mm;
  • infeed height - 2.900 mm;
  • discharge height - 1.100 mm.

Technical data:

  • capacity - 1.200 kg;
  • Motor with gearbox;
  • made of stainless steel;

116 62 k

116 62a k

The picture of the machine after dismounting


116.61

Pallete-boxes tippler with lift for fixing box CABINPLANT

Overall dimensions:

  • width - 1600 mm;
  • length - 1500 mm;
  • height - 1900 mm.

Technical data:

  • Manufacturer: CABINPLANT
  • No. - 101105 - 005;
  • Type - Kartipper;
  • pallete-box dimensions: 800 mm x 1.200 mm
  • Made of stainless steel;
  • hydraulic pump:
    • SH GROUP AS;
    • Type - SH 10-3.7-1,5 kW;
    • No - 06319-24269-3.

116 61 k

116 61a k


116.60

Frozen blocks cutter RÜHLE

Overall dimensions:

  • length - 1400 mm;
  • width - 720 mm;
  • height - 1620 mm.

Working chamber dimensions:

  • width - 600 mm;
  • length - 960 mm;
  • height - 340 mm.

Plank dimensions:

  • Width - 450 mm;
  • Height - 70 mm;
  • Thickness - 20 mm.

Made of stainless steel.

116 60 k

116 60a k

116 60b k


116.59

Table clipping machine Technopack Tipper Clipper

Technical data:

  • Manufacturer - Technopack
  • Model - Tipper Clipper
  • 1-row

52 k

52a k

52b k
The picture of the machine before reconditioning


116.58

Mechanical machine of hooves removing - stainless steel

Overall dimensions:

  • length - 730 mm
  • width - 280 mm
  • height - 1.020 mm

Technical data:

  • rolls length - 290 mm.


The picture of the machine after dismounting


116.57

Tippler for barrels height 750 mm

Overall dimensions:

  • height - 1.360 mm
  • width - 660 mm
  • depth - 600 mm

Basket dimensions:

  • width - 660 mm
  • height - 1.340 mm
  • depth - 600 mm

Technical data:

  • Hydraulic system
  • baarrel diameter - 420 mm
  • barrel working height - 700 mm

116 57 k


116.56
  600 l barrels stainless steel tippler

 
Overall dimensions:
  • length - 1300 mm
  • width - 1050 mm
  • height - 1100 mm
Technical data:
  • hydraulic pump motor - 1,5 kW;
  • barrel space width - 760 mm
  • barrel space height - 1000 mm

116 56-k

The picture of the machine after reconditioning


116.55
Stainless stell barrel tippler

Overall dimensions:
  • length - 1500 mm
  • width - 1080 mm
  • height - 1500 mm

Technical data:

  • barrel entrance - 560 mm
  • barrel heith - 870 mm

116 55 k

116 55a k

The picture of the machine after reconditioning


116.54
Stainless steel barrel tippler


Overall dimensions:
  • length - 1.400 mm
  • width - 1.250 mm
  • height - 1.280 mm

Technical data:

  • space for barrel entrance - 570 mm
The picture of the machine after reconditioning

116.53
Tippler for pallete-boxes with top pressure for pallete stabilizing and discharge protection
Overall dimensions and technical data:
  • height up to discharge - 1.250 mm
  • total height during discharging - 2.800 mm
  • length of pallete-box - 1.230 mm
  • width of pallete-box - 1.100 mm
  • minimal height of pallete-box - 720 mm
  • maximum height of pallete-box - 830 mm
  • maximum load - ok. 1.100 kg
  • power - 1,5 kW
  • Pallete-boxes dimensions: 1.200x1.000 mm
116 53 k
 
116 53a k
 
The pictures after reconditioning

 116.52
Tippler for pallete-boxes with modular belt for product transporting


Overall dimensions:
  • length - 2.200 mm
  • horizontal length during discharging - 3.000 mm
  • width - 2.000 mm
  • height - 3.000 mm
  • height when infeeding - 3.000 mm
Inner dimensions:
  • width - 1.300 mm
  • depth - 1.300 mm
  • height - 2.170 mm
  • belt width - 1.250 mm

Pallete-boxes dimensions: 1.200x1.000 mm


The picture of the machine after dismounting

116.51
Tippler for pallete-boxes with modular belt for product transporting


Overall dimensions:
  • length - 1.800 mm
  • horizontal length during discharging - 3.000 mm
  • width - 1.800 mm
  • height when infeeding - 3.000 mm

Inner dimensions:

  • length - 1.200 mm
  • width - 1.115 mm
  • height - 2.100 mm
  • belt width - 1.250 mm

Pallete-boxes dimensions: 1.200x1.000 mm

The picture of the machine after dismounting

116.50
  Tippler for pallet-boxes

Overall dimensions:
  • length - 1.800 mm
  • width - 1.750 mm
  • heignt - 2.900 mm
Inner dimensions:
  • length - 1.650 mm
  • width - 1.200 mm
  • height - 1.117 mm
Technical data:
  • hydraulic motor
  • discharging with manual control
  • dimensions of pallete-box: 1.200x1.000 mm

Zdjęcie urządzenia po demontażu


116.49
Clipper POLY-CLIP - FCA-S 3451

Overall dimensions:
  • length - 1.400 mm;
  • width - 1.300 mm;
  • height - 1.900 mm.
Technical data:
  • Manufacturer - Poly-Clip System, Germany;
  • Model - FCA-S 3451;
  • Power supply - 280/400 V - 50/60 Hz - 16 A;
  • Air pressure - 5-7 bar;
  • Air consumtion - 3,5 l/tact;
  • Minimal air compressor's tank capacity - 250 l;
  • Natural or artificial intestine diameter - 40-120 mm;
  • Clip length - 15-18 mm;
  • Power - 2,5 kW;
  • Weight - 500 kg.
Intestine diameter Clip size
45-50 mm 15-07/5x1,25 mm
55-60 mm 18-07/5x1,50 mm
15-08/5x1,50 mm
65-70 mm 15-09/5x1,75 mm
75-85 mm 15-09/5x1,75 mm
18-09/5x1,75 mm
18-09/5x2,00 mm
90-105 mm 18-09/5x2,00 mm
18-12/5x2,00 mm
110-120 mm 18-10/5x2,00 mm
18-12/5x2,20 mm

116 49 k

116 49a k

 116 49b k


116.47
BAADER 170 - Filleting, heading and gutting machine for flat fish - Flounder, etc.

Overall dimensions:

  • length - 2.500 mm
  • width - 1.150 mm
  • height - 1.800 mm.

Technical data:

  • oparating personnel - 1 osoba;
  • fish length - 25-35 cm;
  • capacity - max. 40 pcs./min.
  • power - 2,2 kW
  • water consumption - 25-30 l/min.
  • weight - 1.100 kg
  • weight with equippment - 1.590 kg.


Catalogue picture

The picture of the machine before reconditioning


116.46
BAADER 56 - Skinning machine and fillet cutting machine for herring, sardine, etc.

BAADER 56 is desinged as an attachement for herring filleting machine. Fish working length from about 19 to 42 cm.

Overall dimensions:
  • length - 940 mm
  • width - 800 mm;
  • height - 630 mm.
Technical data:
  • Fish - herring, sardine, etc.;
  • Capacity depands on filleting machine up to max. 300 fillets/min.;
  • No personel machine;
  • Water consumption - ab. 16 l/min.;
  • Power consumption - 0,75 kW;
  • Air consumption - 25 l/min. (6 bar);
  • Weight - 200 kg;


Catalogue picture


116.45
BAADER 66 - herrings skinning machine

Overall dimensions:
  • length - 2.500 mm
  • width - 1.040 mm
  • Height - 1.400 mm
Technical data:
  • operator - 1 or 2 persons;
  • capacity - up to 60 single fillets/min. (depands on fish size and operator's ability);
  • power - 0,75 kW;
  • water consumption - about 3 l/min.;
  • weight - 490 kg.

Click this link to open PDF document - with pictures na English description


The picture of the machine before reconditioning


116.44
2-row clipper with looper POLICLIP

Technical data:

  • Manufacturer - Policlip;
  • Type - DCD-H 6043;
  • 2-row clipper with looper.


The picture of the machine before reconditioning


The picture of the machine after reconditioning


116.43
Drum plucking machine

Overall dimensions and technical data:
  • total depth - 1.200 mm
  • total width - 1.000 mm
  • total height - 1.250 mm
Technical data:
  • dram diameter - 670 mm
  • made of stainless steel
  • power - 3 kW
  • turnovers - 1.440 U/min.
  • capacity - 4-7 chickens per cycle
  • cycle length - 4-6 min.
  • water supply.

116 43 k

116 43a k
The pictures of the machine - brand new


116.42
Poultry corps divider - LINCO

Overall diemensions:

  • lenght- 440 mm;
  • width - 370 mm;
  • height - 690 mm.

Technical data:

  • power of engine - 2,2 kW;
  • turnovers - 1.400 U/min.;
  • power supply - 220/380 V - 9,2/5,3 A.






Pictures of the machine after reconditioning


116.41
Electrical stainless steel sterilizer for saws

Overall dimensions:

  • Length - 1.300 mm;
  • Width - 550 mm;
  • Height- 700 mm.

Inner dimensions:

  • Length - 1.100 mm;
  • Width - 300 mm;
  • Height - 630 mm.

Technical data:

  • Themperature regulation;
  • On wheels;
  • Bootom water outlet.

116 41 k


116.40
Weighing table for cutters' knives - Kremer Grebe

Overall dimensions:

  • Length - 450 mm;
  • Width - 730 mm;
  • Height - 420 mm.


Picture of the machine after reconditioning


116.39
1-raw clipper "TECHNOPACK"

Technical data:

  • Manufacturer - Technopack;
  • Type - TSC-N-31-341




116.38
2-raw clipper "TIPPER TIE"

Technical data:

  • Manufacturer - Tipper Tie Technopack;
  • Type - DCA-E;
  • Intestine diameter up to 100 mm.








116.37

Skin's membrane removing machine - Webber

It is used for taking out membrane out of beef, pork, poultry muscles. It can be used for removing skin from many kinds of fish.

Overall dimensions:

  • length - 750 mm;
  • width - 800 mm;
  • height - 900 mm;

Technical data:

  • Manufacturer – Webber GmbH, Germany;
  • Type – ASE 453;
  • Serial No. - 543;
  • Voltage - 400 V/50 Hz;
  • Power - 0,4 kW
  • roll width - 440 mm.

116 37 k


116.36

Mobile, universal device for checking the meatness of pork and its quality - PQM-I

Technical data:

  • Manufacturer – INTEK GmbH, Germany;
  • Type – PQM-I;
  • Inner power supply from battery or outside power supply 240 V;
  • Continuous data transmission through connection RS-232;
  • Memory – 3.500 data items;
  • Weight about 1.100 g;
  • The device proper for working in ban conditions, waterproof.

Measurement method:

  • The base for calculating meatness is thickness of pork fat in the point K II;
  • Thickness of pork fat in the point K I and the distance from  K I to tje pithy canal, measured with PQM-I;
  • Percentage of the meatness is calculated after inputing the measured data to the calculating formula.

The device advantages:

  • Display on 2 x 8 digit screen;
  • Possibility of inputing aditional data with numeric i function keys, i.e. current number, tatoo marking, date, weight, vet, other notes;
    ·Statistical data sorting with dates, tatoo marking, information about the tradesman and customer;
  • High repeatability of the measurement result from the same meat portion (over 99%);
Certificate of Main Measurement Office in Vienna, Austria and The Meat and Fat Industry Institute in Warsaw, Poland.






116.35
Stainless steel basket sterilizer/pasteurizer

Overall dimensions:
  • Length – 1.440 mm;
  • Width – 1.440 mm;
  • Height – 1.430 mm.
Inner overall dimensions:
  • length - 1.200 mm
  • width - 1.200 mm
  • depth - 1.200 mm
Other information about the sterilizer/pasteurizer tank:
  • Walls and floor insulated - 50 mm width
  • steam straight to the water (open system)
  • 2 pipes providing water from plant water system (green in the picture below)
  • Central bottom water discharge to the tank side
  • movable (on wheels) lid on 2 side rails
  • collar steel thickness - 8 mm
  • walls and bottom (inner and outside) stainless steel brass thickness - 5 mm
  • made of stainless steel
  • set on the round legs
  • it can be fixes and work with other the same kind tanks;
  • There is working basket made of mild steel - capacity 880 l
  • There is a trolley on wheels for basket transportation - made of mild steel.


116.34
Sterilizers

A/ Big
 
Overall dimensions:
  • Length – 960 mm;
  • Width – 350 mm;
  • Height – 830 mm;
  • Depth - 560 mm.
B/ Medium
 
Overall dimensions:
  • Length – 600 mm;
  • Width – 300 mm;
  • Height – 920 mm;
  • Depth - 620 mm.
C/ Small
 
Overall dimensions:
  • Length – 230 mm;
  • Width – 200 mm;
  • Height – 360 mm.


116.33
Hair removing machine 1-roll

Overall dimensions:

·    Length – 2.800 mm;
·    Width – 1.500 mm;
·    Height – 1.900 mm.

Denmark.






116.32
Cattle skinning machine

Overall dimensions:
  • Length – 2.120 mm;
  • Width – 1.300 mm;
  • Height – 1.600 mm.
Roll dimensions:
  • working width - 900 mm;
  • middle thickness - 680 mm.


116.31
Sexsorter

Overall dimensions:
  • lenght - 3.500 mm;
  • width - 700 mm;
  • height - 1.750 mm.
Technical data:
  • Engine - 1.400 rpm;
  • engine type - STg 90 - 4L S1;
  • 220/380 V- 50 Hz;
  • engine power - 0,75 kW.


116.30
Set for gutting, deheading, carcassing and filleting "ARENCO" (CIS - CIF)


CIS

Overall dimensions:

  • length - 3.550 mm;
  • width - 1.300 mm;
  • height - 1.450 mm;

Technical data:

  • fish gutter length - 260 mm;
  • fish gutter width - 60 mm;
  • fish gutter depth - 20 mm.

CIF

Overall dimensions:

  • length - 1.800 mm;
  • width - 500 mm;
  • height - 1.250 mm.

Mesh conveyor

Overall dimensions:

  • length - 1.500 mm;
  • width - 400 mm;
  • height- 660 mm;

Technical data:

  • stainless steel mesh width - 100 mm.

116.29

Baader 175 -Sole/Flounder/Halibut processing line

Overall dimensions:

  • length - 3.450 mm;
  • width - 2.900 mm;
  • height - 2.100 mm.

Technical data:

      ·    Operating personnel – 2 people;
      ·    Maximum efficiency – 40 pieces/min.;
      ·    Working efficiency – 35 pieces/min.;
      ·    Power consumption – 4 kW;
      ·    Water consumption – 15 l/min.;
      ·    Overall dimensions – 3,45 x 2,9 x 2,1 m;
      ·    Netto weight – 1.450 kg;
      ·    Fish length – 31 – 52 cm;
              ·    For fish: With Gray Sole, American plaice, Dab, Black Back, Yellowfin Sole, Yellowtail Flounder, Dover Sole, Slime Sole, Slippery Sole, English Sole, Lemon, Floundr, Plaice, Winter Flounder Blackback, Greenland halibut.


116.28

Baader 417 - Cod processing line – head removing machine

Overall dimensions:

  • length - 2.160 mm;
  • width - 880 mm;
  • height - 1.860 mm.

Technical data:

      ·    Operating personnel - 1 person;
      ·    Efficiency – up to 40 pieces/min.;
      ·    Power consumption – 1,87 kW;
      ·    Water consumption – 5 l/min.;
      ·    Overall dimensions – 2,16 x 0,88 x 1,86 m;
      ·    Netto weight – 260 kg;
      ·    Fish length  - 30 – 70 cm;
      ·    Fish weight – 0,3 – 2,5 kg (with head);
              ·    For fish: Cod, Pacific Cod, Haddock, Whiting, Cape Hake, Chilean Hake, Southwest Atlantic Hake, Hake (European), Pacific Hake, Pollack, Saithe (Pollock), Alaska Pollack;


116.27

Baader 184 - Cod processing line

Overall dimensions:

  • length - 6.150 mm;
  • width - 1.700 mm;
  • height - 1.500 mm.

Technical data:

·    Operating personnel - 1 person;
·    Catalogue efficiency – 24 – 40 pieces/min. (it depends on the fish size);
·    Working efficiency – 36 – 30 pieces/min.;
·    Power consumption – 10 kW;
·    Water consumption – 25 l/min.;
·    Overall dimensions – 6,15 x 1,7 x 1,5 m;
·    Netto weight – 2.500 kg;
·    Fish length  - 30 – 70 cm;
·    Fish weight – 0,3 – 2,5 kg (with head);
·    For fish: Cod, Pacific Cod, Haddock, Whiting, Cape Hake, Chilean Hake, Southwest Atlantic Hake, Hake (European), Pacific Hake, Pollack, Saithe (Pollock), Alaska Pollack;

 


116.26

Pneumatic pistol for slaughtering cattle FAMACO

Overall dimensions:

  • length- 400 mm;
  • width - 150 mm;
  • height - 300 mm.


116.25

Skinning machine - TOWNSEND

Overall dimensions:

  • length - 750 mm;
  • width - 800 mm;
  • height - 900 mm;

Technical data:

  • desinning unit width - 440 mm.


116.24
Lifting-tilting device for tumblers
Overall dimensions:
  • length - 1.050 mm;
  • width - 1.800 mm;
  • height - 1.150 mm.
Technical data:
  • Manufacturer - Stork Protecon, Holland;
  • Type LF 1000;
  • Serie no. - 36/6006;
  • Power supply - 380 V;
  • Phases - 3;
  • Frequency - 50 Hz.

116.23
The mill for stubble and for utilization with belt conveyor on tracks (rails)

Overall dimensions:

  • Total length (the machine + conveyor + track) - 5.050 mm;
  • Belt conveyor length - 2.100 mm;
  • Total width - 1.800 mm;
  • Total height - 1.650 mm.

Technical data:

  • Producer - Zakłady Wyrobów Metalowych TRYMET, Pilchowo, Poland;
  • Type T 38;
  • No - 1677;
  • made in 1999;
  • Weight (without conveyor) - 650 kg.


116.22

Subpressure lance with sterilizer

Lance is used for washing and cleaning throats in inner spaces of cattles. The lance is equipped with sterilizer on a leg fixed to the floor.

Overall dimensions:

  • total length - 1.100 mm;
  • height - 1.200 mm;

Technical data:

  • power source of sterilizer - electricity;
  • lance is equipped with valve and water sprinkling tip.


116.21
Line for pigs' intestines, made in Denmark


LINE FOR PORCINE INTESTINES TREATMENT – capacity up to 250 sets/h

Line overall dimensions:

  • Length – 5.500 mm;
  • Width – 1.700 mm;
  • Height – 1.700 mm.

The line consists of:

  • A: 2-chamber bath for conditioning and tempering intestines in the temperature of 500C for about 30 min.
Overall dimensions of the 1st chamber of bath A - 

   Length – 3.000 mm; Width – 430 mm; Depth – 700 mm.

Overall dimensions of the 2nd chamber fo bath A -

    Length - 3.000 mm; width - 480 mm; depth - 700 mm.

 Overall dimensions of bath A:

    Length - 3.400 mm; width - 1240 mm; height - 1260 mm

  • there is 3-roll set installed at the biginning of the bath (1 metal roll and 2 rubber rolls).
  • opposite side of bath A is connected to bath B.

B: 1-chamber bath:

·        Bath overall dimensions –  
     Lenth – 1.420 mm; width – 880 mm; height – 400 mm.
·        Outer dimensions of the bath –
     Length – 1.820 mm; width – 1.500 mm; height – 1.400 mm.
·        There are 2 working sets installed on bath B:
-         1st set consists of 3 rolls (1 metal roll and 2 rubber rolls);
-         2nd set consists of 6 rolls (2 metal rolls and 4 rubber rolls).

Baths, rolls and part of the cover made of stainless steel. The rest of cover made of iron cast - zink.


116.20

Pneumatic emptier of Cimber trollies - Lutetia

Overall dimensions:

  • length - 2.000 mm;
  • width - 1.350 mm;
  • height - 2.000 mm.

Technical data:

  • Max. load weight - 250 kg;
  • made in 1995.

116.19
Cattle tongues washer and cleaner

Overall dimensions:
  • total length - 1.900 mm;
  • total width - 1.500 mm;
  • total height - 1.700 mm.
Technical data:
  • Producer: The Cincinnati Butchers' Supply Co.
  • Boss Machines, Chicago, USA
  • N0. 1 N 922

116 19 k

116 19a k


116.18

Press for ham LANGEN, round

Overall dimensions:

  • length - 1.000 mm;
  • width - 700 mm;
  • height - 1.600 mm;

Technical data:

  • mandolin's shape - 210 mm x 160 mm;
  • Type - H8/8

Iron table for ham LANGEN, round


116.17

Ham press Langen

Overall dimensions:

  • length - 5.385 mm;
  • width - 730 mm;
  • height - 1.150 mm;

Technical data:

  • efficiency - 120 - 180 ham cans/h.
  • vaccum chamber capacity - 70 l;
  • Type - H 95/S
  • total length (with casing) - 5.500 mm;
  • total width (with casing) - 930 mm;
  • total height (with casing) - 1.450 mm.

Ham press Langen


116.16

Stubble separator with strainer and drip gutter

Overall dimensions:

  • length - 2.400 mm;
  • width - 900 mm;
  • height - 2.200 mm.

Technical data:

  • engine power - 0,75 kW;
  • gear turnovers - 130 U/min.;

Stubble separator with strainer and drip gutter


116.15

Strewer

Overall dimensions:

  • length - 900 mm;
  • width - 700 mm;
  • height - 1.450 mm;

Technical data:

  • Power - 105 W.

Strewer


116.14

Looper

Overall dimensions:

  • length - 770 mm;
  • width - 630 mm;
  • height - 1.020 mm.

116 14 k

116 14a k

Looper


116.13

Washing and cleaning machine for chicken paws and stomaches

Overall dimensions:

  • Total length - 1.750 mm;
  • Total width - 1.300 mm;
  • Total height - 1.400 mm;

Technical data:

  • Engine power - 3 kW;
  • Work temperature - 40C;
  • Type SZJKe34a;
  • Made completely of stainless steel.

116 13 k

 116 13a k

Washing and cleaning machine for chicken paws and stomaches


116.12

NORDEN CIR automatic loading unit for herrings

Technical data:

  • Efficiency - working 500-700 kg/h, 200-230 kg/h of ready product.

NORDEN CIR automatic loading unit for herrings


116.11

Deheading and gutting machine, type SFD 300

Technical data:

  • total height - 1.200 mm;
  • table's diameter - 1.300 mm;
  • total length - 2.900 mm;
  • engine power - 7,5 kW, 1.400/1.720 r.p.m.
  • efficiency - approx. 150 kg/h.

Deheading and gutting machine SFD 300


116.10

Work stations with height regulation

Technical data of 1st version:

  • total height of the stations - 2.500 mm i 2.540 mm;
  • lifting height - 1.000 mm i 1.000 mm;
  • pneumatic power;
  • feet pedals steering;
  • zink construction;
  • we have couple of pieces.

Technical data of 2nd version:

  • total height of the stations - 2.900 mm i 2.850 mm;
  • lifting height - 1.200 mm i 1.200 mm;
  • pneumatic power;
  • feet pedals steering;
  • zink construction;
  • we have couple of pieces

.116 10 k

116 10a k

116.9

Sliding hook with an additional hook for hanging cows' halves

Technical data:

  • Carrying capacity - 1.250 kg;
  • Hook is made of stainless steel;
  • Casing is made of galvanized steel.

116 9 k

Sliding hook


116.8

Sterilizer for large slaughtering tools

Overall dimensions:

  • Length - 480 mm;
  • Width - 400 mm;
  • Height - 850 mm;

Sterilizing chamber's dimensions:

  • Length - 450 mm;
  • Width - 370 mm;
  • Depth - 440 mm.

!

Sterilizer for large slaughtering tools


116.7

Sterilizer for large slaughtering tools

Overall dimensions:

  • Length - 550 mm;
  • Width - 900 mm;
  • Height - 1.100 mm.

Sterilizer for large slaughtering tools

116.6

Pigs' and cattle legs' washer

Overall dimensions:

  • total length - 1.800;
  • total width - 950 mm;
  • total height - 1.550 mm;

Technical data:

  • drum length - 1.200 mm;
  • drum diameter - 640 mm;
  • drum capacity - 400 l;
  • made of stainless steel brass - 6 mm thick;
  • paddles made of stainless steel - 20 thick;
  • manual or mechanical infeed through the lid;
  • mechanical discharge through bottom latch;
  • power - 3 kW;
  • Inside of the drum there is a sprinkling bar with hot water (60-67°C);
  • Charge up to 2/3 of capacity;
  • one cycle time - about 10 min.
  • frame made of galvanized steel.

Pork and beef legs washer


116.5

Productive platforms with ladders,  steps, guard-rails made of stainless steel, aluminium, zink steel - different sized and height


116.4

Expander

Technical data:
  • lifting capacity - 250 kg;
  • stainless;
  • length - 560 mm and 660 mm.



Expander


116.3
Rolling expander
R-560-1, R-660-1, R-560N-1 R-660N-1

Technical data:
  • lifting capacity - 250 kg;
  • stainless;
  • length R-560N-1, R-560-1 * 560 mm;
  • length R-660-1, R-660N-1 ** 660 mm.



Rolling expander



Rolling expander


116.2
Roller hook MTR 30.04

Technical data:
  • lifting capacity - 250 kg;
  • stainless.



Roller hook



Spacing hook


116.1
Mechanical grindstone MTR 30.04

Grindstone is used for sharpenning knives.

Overall dimensions:
  • length - 764 mm;
  • width - 360 mm;
  • height - 1.255 mm.
Technical data:
  • power installed - 0,4 kW;
  • shield rotating - 50-60 rotations/min;
  • shield diameter - 600-650 mm;
  • shield width - 100-120 mm;
  • weight - 170 kg.



Mechanical grindstone MTR 30.04

Dru Samia Jersey Filip Forsberg Jersey