Tuesday the 12th - copyright Konsorcjum Andziak - HostingFlow.com

 

122.6

Slaughtering plant for cattle (parts)

1. Sliding track for slaughtering plant in EURO standard {122.1}

Technical data:

  • complete type EURO, it means: 2 C-sections, hanger, pipe;
  • made of galvanized steel;
  • sliding pipe diameter - Ø 60 mm;
  • sliding pipe holders every 1.000 mm.

Others:

  • curves;
  • crossovers.

 

2. Sliding hook with and additional hook for hanging cows' halves {116.9}

Technical data:

  • carrying capacity - 1.250 kg;
  • hook made of stainless steel;
  • casing made of galvanized steel.

3. Stainless steel aprons washer {116.66}

Overall dimensions:

  • length - 1.100 mm;
  • width - 450 mm;
  • height - 1.900 mm.

 4. Stainless steel hanger for aprons (drying) {128.7}

Overall dimensions:

  • length/height - 1.180 mm;
  • width - 950 mm.

128 7 k

4a. Stainless steel holder for hangers for aprons {128.58}

Overall dimensions:

  • length - 2.000 mm;
  • width - 800 mm;
  • height - 2.100 mm.

128 58 k 

5. Pneumatic pistol for cattle slaughteering FAMACO {116.26}

Overall dimensions:

  • length - 400 mm;
  • width - 150 mm;
  • height - 300 mm.

6. System of blood collectin {128.25}

System consists of the following units:

  • sink with knives serilizer;
  • pipe knive for blood gathering;
  • blood tank on wheels - 2 pcs.;
  • blood pump;
  • blood centrifuge.

Centrifige overall dimensions:

  • length - 410 mm
  • width - 360 mm
  • height - 860 mm.

Centrifuge for separating plasma from blood technical data:

  • manufacturer - Alfa Laval;
  • type - BPB 204A-11/4228-1;
  • no. - 297 32 21;
  • power - 0,37 kW;
  • turnovers - 1.400 U/min.;
  • power supply - 3x380V/1,2/2,1 A/50 Hz.


7. High stainless steel platform for earining croup and pasterns cutting off and hanging {128.50}

Overall dimensions:

  • depth - 1.500 mm;
  • width - 800 mm;
  • height up to the platform - 1.870 mm;
  • height with barrier - 2.770 mm.

Platform dimensions:

  • width - 800 mm;
  • depth - 700 mm.

8. Hydraulic cutter off of top fetlocks/pasterns {113.3}

Hydraulic cutt-off saw 32 AR2 is used for cutting off beef top fetlocks/pasterns.

Technical data:
  • power installed - 4 kW;
  • power supply - 3x380V, 50Hz;
  • rotation speed - 1.410 rotations/min.;
  • oil tank capacity - 40 l;
  • suggested working liquid - hydraulic oil hydrol 40;
  • maximum pressure - 16 MPa;
  • maximum pressure on the way back - 5 MPa.

9. Hydraulic cutter off of fetlocks/pasterns and horns {113.3}

Hydraulic cutt-off saw 32 AR2 is used for cutting off beef horns and fetlocks/pasterns.

Technical data:
  • power installed - 4 kW;
  • power supply - 3x380V, 50Hz;
  • rotation speed - 1.410 rotations/min.;
  • oil tank capacity - 40 l;
  • suggested working liquid - hydraulic oil hydrol 40;
  • maximum pressure - 16 MPa;
  • maximum pressure on the way back - 5 MPa.

10. Blade saw for sternums {113.28}

Overall dimensions:

  • corp length - 600 mm;
  • total lenght with blade - 840 mm;
  • width - 200 mm;
  • height - 360 mm.

Technical data:

  • blade lenght - 240 mm.

11. Cabinet for beef heads washing after skinning and horns cutting off

It has 4 vertical sprinkling units, each has 3 nozzles and gutter.

12. Pressure washing lance with sterilizer {116.22}

Lance is used for washing and cleaning throats in inner spaces of cattles. The lance is equipped with sterilizer on a leg fixed to the floor.

Overall dimensions:

  • total length - 1.100 mm;
  • width - 250 mm;
  • height - 1.200 mm;

Technical data:

  • power source of sterilizer - electricity;
  • lance is equipped with valve and water sprinkling tip.


13. Cattle skinning machine {116.32}

Overall dimensions:

  • length - 2.120 mm;
  • width - 1.300 mm;
  • height - 1.600 mm.

Roll dimensions:

  • working width - 900 mm;
  • middle thickness - 680 mm.

Hydraulic unit technical data:

  • power - 5,5 kW;
  • turnovers - 1.450 U/min.;
  • pump working pressure - 150 bar.

Hydraulic unit dimensions:

  • length - 1.160 mm;
  • width - 520 mm;
  • height - 900 mm.

Gearbox technical data:

  • type - 3N 400 1;
  • power - 2,64 kW;
  • turnovers - 1.440 U/min.

14. Stainless steel platforms next to the skinning machine (2 pcs.) {128.54}

15. Sstainless steel platforrm for taking out pre-stomachs and intestines {46}

Overall dimensions:

  • length - 1.500 mm;
  • width - 820 mm;
  • height - 750 mm.

16. Stainless steel tilting trolley for collecting pre-stomachs and intestines {128.26}

Overall dimensions:

  • lenght - 1.015 mm;
  • width - 840 mm;
  • bath depth - 250 mm.

17. Trolley with hooks for pericardium and heads

Overall dimensions:

  • length - 2.000 mm;
  • width - 1.000 mm;
  • height - 1.300 mm (without trolley);
  • height - 1.700 mm (with trolley).

Technical data:

  • 6 rows of hangers with 12 hooks each (altogether 72 hooks).

The picture without trolley:

18. Stainless steel screw lift platform with sink and sterilizer for sawman {116.74}

  • Platform lifting height - 1.800-2.000 mm.
  • Platform is equipped with foot pedal steering.
  • Platform is equipped with pedal cold/hot water sink (stainless steel).
  • Platform is equipped with electric sterilizer for knives (stainless steel).

 

19. Frame saw "BEST", USA with safty voltage unit and balancer {113.18}

Overall dimensions:

  • total length - 1.350 mm;
  • width - 400 mm;
  • height - 500 mm.

Technical data:

  • blade length - 500 mm.

20. Stainless steel frame saw sterilizer {116.71}

Overall dimensions:

  • length - 1.000 mm
  • width - 200 mm
  • height - 1.010 mm.

Technical data:

  • made of stainless steel
  • thermoregulator
  • legs for fixing to the floor
  • water feeding and discharge.

21. Stainless steel platform with ladder and barrier for half-carcasses washing {25}

Overall dimensions:

  • length - 1.500 mm;
  • width - 820 mm;
  • height - 800 mm.

OTHER SLAUGHTERING MACHINES:

22. Cattle legs' washer {116.6}

Overall dimensions:

  • total length - 1.800;
  • total width - 950 mm;
  • total height - 1.550 mm;

Technical data:

  • drum length - 1.200 mm;
  • drum diameter - 640 mm;
  • drum capacity - 400 l;
  • made of stainless steel brass - 6 mm thick;
  • paddles made of stainless steel - 20 thick;
  • manual or mechanical infeed through the lid;
  • mechanical discharge through bottom latch;
  • power - 3 kW;
  • Inside of the drum there is a sprinkling bar with hot water (60-67°C);
  • Charge up to 2/3 of capacity;
  • one cycle time - about 10 min.
  • frame made of galvanized steel.

23. Stainless steel manual machine for cow's hooves cleaning {128.23}

Technical data:

  • width of working part with teeth - 330 mm
  • arm length - 1.000 mm
  • height - 900 mm
  • weight - 45 kg

24. Pre-stomach cleaning machine {114.7}

Overall dimensions:

  • length - 2.000 mm;
  • width - 1.500 mm;
  • height with open lid - 1.800 mm;
  • height with closed lid - 1.380 mm.

Technical data:

  • power - 11 kW;
  • power supply - 380 V/ 24 A/ 50 Hz;
  • turnovers - 960 U/min.;
  • drum diameter - 1.220 mm;
  • drum depth - 550 mm.

 

25. Intestines emptying machine - MOD-33.07 {114.1}

It's used in meat processing plants. It's fitted for emptying intestines in treatment lines and for individual work. Maschine's shields are made of acid-proof steel, the frames are protected by tin layer and painted with an epoxide laquer.

Overall dimensions:
  • length - 1.200 mm;
  • width - 480 mm;
  • height - 1.280 mm.
Technical data:
  • efficiency at emptying pork intestines - 140 sets/hr;
  • efficiency at emptying beef intestines - 80 sets/hr;
  • power - 0,4 kW;
  • power supply - 220/380V, 50Hz;
  • water consumption at temperature 313oK(40oC) - 0,7 m/hr;
  • weight - 138 kg;
  • operated by 1 person.

26. Crushing and tossing machine - MGD - 35.05 {114.2}

The crushing machine is used in meat processing industry at mechanical treatment of cattle intestines. It's fitted for preliminary crushing and loosening mucous membrane of intestines in treatment line. It's also fitted for individual work. Machine rollers and shields are made of acid-proof steel, the frames are protected by tin layer and painted with an epoxide laquer.

Overall dimensions:

  • length - 890 mm;
  • width - 575 mm;
  • height - 1.150 mm.
Technical data:
  • efficiency - 140 sets/h;
  • power - 1,1 kW;
  • voltage - 220/380V, 50Hz;
  • water consumption at temperature 313 K (40 C) - 2 m/hr;
  • weight - 318 kg;
  • loperated by 1 person.


122.5

Cage for slaughtering of pigs MANCINI (never used!)

Overall dimensions:

  • Length – 1.800 mm;
  • Width – 850 mm;
  • Height – 2.100 mm.

Technical data:

  • Side and back door - pneumatic opening and closing;
  • Made of zink steel.

122 5 k

122 5a k


122.4

Hook roller, stainless steel

Technical data:

  • total length - 380 mm;
  • length of hanger (stainless steel) - 210 mm;
  • hook length with connector - 170 mm;
  • PE double wheels - diameter 90 mm;
  • side, double stabilizing rolls - 45 mm.


122.3

Sling chain roller, stainless steel

Technical data:

  • total length - 960 mm;
  • trace length - 620 mm;
  • hanger length - 335 mm;
  • PE double wheels, bearing - diameter 100 mm;
  • side, double stabilizing rolls - 45 mm.


122.2
Pigs' slaughtering plant - capacity 120 pcs./h - made in 2001
The line consists of the following machines:

1. Driving through tunnel with sprinkling system - made of zinc steel

The picture of the tunnel before reconditioning
2. Stunning box - made of zinc; bed - made of stainless steel

3. Stunning clumps with safety voltage transormer

122 2c k
The picture of the clumps before reconditioning

4. Hooks with holders for moving pigs for bleeding - made of stainless steel - manufacturer: BANSS


The picture of the hooks before reconditiong

5. Working landing for hanging carcasses bleeding, equipped with pipe knife washer and sterilizer, aprons washer, hands washer and butchers' knives sterilizer - made of stainless steel
 

The picture of the landing before reconditioning

6. Pigs conveyor to the pigs' parboiler with automatic system of  pigs' legs releasing - made of zinc steel - manufacturer: BANSS
 

The picture of the conveyor before reconditioning

7. Automatic kettle for  pigs' parboiling - made of stainless steel - manufacturer: BANSS
 

The picturee of the kettle before reconditioning

8. De-hairing machine after pigs' parboiling combined with parboiler - made of stainless steel - manufacturer: BANSS
 

Picture of the de-hairing machine before reconditioning

9. Working table for pig preparing for further process - made of stainless steel - manufacturer: BANSS
 

The picture of table before reconditioning

10. Gas oven for pigs' hair rest removing - made of stainless steel - manufacturer: BANSS
 

The picture of the oven before reconditioning

11. Whip washer for carcasses after burning - whipping shafts made of stainless steel - construction made of mild steel, it is covered with stainless steel
 

The picture of washer before reconditioning
12. Station for eye and inner ear removing - round, mechanical knife - manufacturer: Bettcher
 

The picture of the machine before reconditioning

13. 2 people landing for casings and pericardial sac with hand washer and sterilizer - made of stainless steel
 

The picture of landing before reconditioning

14. Tray conveyor for casings  (39 trays) and hook conveyor (hooks between trays) - made of stainless steel
 

The picture of the conveyor before reconditioning

15. Screw movable working platform - made of stainless steel.
- landing moves up to 1.800-2.000 mm;
- landing is feet operated (floor buttons up and down);
- landing is equipped with pedal wash basin for hot and cold water - made of stainless steel;
- landing is equipped with electric knive's sterilizer - made of stainless steel.


The picture of the landing after reconditioning

16. Carcasses saw with safety voltage transrormer and balacer - manufacturer: BEST


The picture of the saw after reconditioning

17. Landing with aprons washer, hands washer and knive's steerilizer - for carcasses halving - made of stainless steel


The picture of the landing before reconditioning
122.1
Slaughtering plant or storage track in EURO standard - zinc


Track description:

  • made of zinc steel
  • EURO standard track
  • streight sliding track
  • crossovers
  • curves
  • shackles
  • pipe EURO diameter - 60 mm
  • pipe holders every 1.000 mm

View of the sample part of the track - as it is






Parts of the track as they are
 
Dru Samia Jersey Filip Forsberg Jersey