Tuesday the 18th - copyright Konsorcjum Andziak - HostingFlow.com

212.18

Vibration rotator

Machine made of stainless steel.

It is used for turning over and shaking product in closed containers (i.e. herring in cream).

Overall dimensions:

  • length - 2.250 mm;
  • width - 750 mm;
  • height - 1.500 mm.

Technical data:

  • Manufacturer - TECHMAT;
  • Type - OBROTNICA WIBRACYJNA;
  • Machine no. - 351A;
  • Made in 2010;
  • belt conveyor with blocking during rotation and shaking;
  • Conveyor data:
    • belt width - 120 mm;
    • length - 1.500 mm;
    • Motor - 0,12 kW/1.335 U/min;
    • Vibrator on the conveyor - eccentric.
  • A cyclic turning machine - pneumatic cylinders connected with wires on circular roads;
  • Machine housing with 4 revision doors.

.

218 18 k

218 18b k

218 18c k


212.17

Vibratory conveyor with a drip FEMIA

Overall dimensions:

  • total length - 2.450 mm;
  • total width - 850 mm;
  • total height - 1.550 mm.

Technical data:

  • gutter working length - 1.500 mm;
  • gutter working width - 600 mm;
  • A drip tub with a trigger - Ø 200 mm;
  • Water spray on the gutter;
  • An eccentric vibrator;
  • Belt drive - with speed control - gearbox - 1 kW/1.440 U/min.

212 17 k

212 17a k

212 17b k


212.16

Vibratory machine, directing the product for 600 mm line

Overall dimensions:

  • length - 3.500 mm;
  • width - 2.150 mm;
  • height - 2.150 mm.

Technical data:

  • Manufacturer - CABINPLANT type SLISKE;
  • motor - 0,37 kW with bevel gear;
  • motor turnovers - 1370 U/min;
  • 2 membranes;
  • 2 vibrators;
  • stainless steel (frame) oraz plactic (gutter).

212 16 k


212.15

Vibratory gutter (transporter) with sorting, sapping gap

Overall dimensions:

  • length - 2.300 mm;
  • width - 1.050 mm;
  • height - 600 mm.

Gutter dimensions:

  • length - 2.000 mm;
  • width - 700 mm;
  • height - 600 mm.
  • gap:
    • dimensions – 630 mm x 310 mm;
    • gap distance – every 3 mm.

Technical data:

  • 2 vibrators:
    • power - 0,8 kW;
    • turnovers - 1.430 U/min.
  • Manufacturer - CABINPLANT, Denmark;
  • type - CS 70/2-- BTM.

212 15 k

212 15a k


212.14
Completely stainless steel vibratory row material infeeder for belt (i.e. freezing tunnel belt) with separating sieve

Overall dimensions:

  • total length - 2.000 mm
  • total width - 1.250 mm
  • total height - 740 mm

2 motors data:

  • type - MVSI 15/700 - AB
  • machine no. - 312522
  • power supply - 220 V - A-1,62 - Y 380 V - A-0,94 - 50 Hz
  • turnovers - 1.500 U/min.
  • power - 0,404 kW
  • bar vibratory table length - 1.920 mm
  • bar vibratory table width - 620 mm
  • vibratory table sides height - 115 mm
  • infeeding for belt minimum width - 620 mm




The pictures of the machine before reconditioning


212.13
Vibratory row material infeeder for belt (i.e. freezing tunnel belt)

Overall dimensions:

  • length - 2.400 mm;
  • width - 860 mm;
  • height - 1.000 mm.

Technical data:

  • Manufacturer - Pektowin Jasło, Poland
  • Type - ZF1
  • Machine no. - 45
  • plate vibratory table length - 920 mm
  • plate vibratory table width - 650 mm
  • vibratory table sides height - 260 mm
  • infeeding for belt minimum width - 1.350 mm
  • motor power - 1,1 kW
  • power supply - 380 V - 50 Hz - 2/4 A
  • motor turnovers - 1.415 U/min.

The picture of the machine before reconditioning

212.12
Vibratory row material infeeder for belt (i.e. freezing tunnel belt) with separating sieve

Overall dimensions:

  • total length - 2.200 mm
  • total width - 780 m
  • total height - 1.000 mm

Motor data:

  • type - SZJe 16b
  • power - 0,6 kW
  • power supply - 380 V - 50 Hz
  • turnovers - 915 U/min.
  • bar vibratory table length - 800 mm
  • bar vibratory table width - 530 mm
  • vibratory table sides height - 100 mm
  • infeeding for belt minimum width - 1.000 mm

The picture of the machine before reconditioning

212.11
Vibratory row material infeeder for belt (i.e. freezing tunnel belt) with separating sieve

  Overall dimensions:

  • total length - 2.300 mm
  • total width - 780 mm
  • total height - 1.120 mm

Motor data:

  • type - SZJe 36A
  • power - 1,5 kW
  • power supply - 380 V - 50 Hz
  • turnovers - 950 U/min.
  • bar vibratory table length - 950 mm
  • bar vibratory table width - 530 mm
  • vibratory table sides height  - 100 mm
  • infeeding for belt minimum width  - 1.060 mm

The picture of the machine before reconditioning

212.10

Vibratory conveyor with the drip

Overall dimensions:

  • total length- 3.430 mm;
  • total width - 840 mm;
  • total height - 1.680 mm.

Technical data:

  • Producer - Femia, Paris - France;
  • Type - E/80;
  • Number - 101 239;
  • 100 E.V. 10;

212 10 k

212 10b k

212 10a k


212.9
Vibratory conveyor to the freezing tunnel with heating of the not perforated section

Overall dimensions:
  • height - 770 mm;
  • width - 880 mm;
  • length - 2.240 mm;

 Technical data:

  • table width- 620 mm;
  • table lenght- 1.960 mm + 240 mm;   
  • perforated section length- 1.100 m;
  • sides' height- 170 mm.


212.8
Vibratory conveyor with dripper and fan.

Overall dimensions:
  • length - 2.120 mm;
  • width - 860 mm;
  • height - 1.300 mm.
Runway's overall dimensions:
  • length - 2.210 mm;
  • width - 470 mm.
Brake fan's technical data:
  • radial;
  • rotor's diameter - 300 mm;
  • type - VPR 20/LG;
  • fan's engine:

- power - 0,25 kW;
- turnovers - 1.390 U/min.;
- power supply - 220/380 V;
- power supply current - 1,5/0,86 A.


212.7
Vibratory conveyor (gutter) to be mounted in the construction

Overall dimensions:
  • length - 1.7200 mm;
  • width - 750 mm;
  • height - 510 mm.
Runway's overall dimensions:
  • length - 1.630 mm;
  • width - 350.

212.6
Vibratory conveyor (gutter) with dripper

Overall dimensions:
  • length - 2.100 mm;
  • width - 700 mm;
  • height - 900 mm.
Runway's overall dimensions:
  • length - 2.100 mm;
  • width - 360 mm;
  • holes (loops) diameter - 3 mm.


212.5

Vibratory conveyor

It's made completely of stainless steel. The bottom of the gutter is perforated.

Overall dimensions:

  • Length - 2.500 mm;
  • Width - 700 mm.

Vibratory conveyor


212.4
Vibrating table (gutter)

Overall dimensions:

  • total length – 4.100 mm;
  • total width – 800 mm;

Technical data:

·    Manufacturer – „COX” Cox and Plant Products Ltd. - USA
·    gutter working length – 3.850 mm;
·    gutter's width – 350 mm;
·    side's height – 110 mm;
·    Construction – carbon steel;
·    electromagnet drive;
·    Machine number – HS 3366;
·    weight – 735 kg.

Vibrating table (gutter)


212.3
Vibratory washer

It is used in the vegetable-fruit industry for washing different kinds of vegetables and fruit.

Overall dimensions:
  • length - 2.450 mm;
  • width - 1.400 mm;
  • height - 1.300 mm.

Vibrating part dimensions:

  • length - 2.270 mm;
  • width at infeed - 940 mm;
  • width at outlet - 740 mm;
  • sides' height at infeed - 200 mm;
  • sides' height at outlet - 100 mm.
Technical data:
  • capacity - 3 t/h;
  • engine power - 0,75 kW;
  • power supply - 3 x 380V, 50Hz.

Other data:

  • At the infeed side water runs through thin slot - on the whole width of the washing table;
  • On 3/4 length of the washing table there are 17 snouts located on three horizontal pipes;
  • Washing table - made of stainless steel;
  • Construction - made of carbon steel;


Vibratory washer


212.2
Vibratory separator

It's used in fruit and vegetable industry for separating fruits and vegetables according to their size.

Overall dimensions:
  • length - 1.650 mm;
  • width - 1.300 mm;
  • height - 1.120 mm.
Technical data:
  • efficiency ~2 t/h;
  • engine power - 0,75 kW;
  • power supply - 3 x 380V, 50Hz.



Vibratory roll designer


212.1

Slotted and vibrating dripping machine

It's used in fruit and vegetable industry for separating impurities.

Overall dimensions:
  • length - 1.650 mm;
  • width - 1.300 mm;
  • height - 1.120 mm.
Technical data:
  • efficiency ~2 t/hr;
  • engine power - 0,75 kW;
  • power supply - 3 x 380V, 50Hz.


Slotted and vibrating dripping machine

Dru Samia Jersey Filip Forsberg Jersey