Tuesday the 14th - copyright Konsorcjum Andziak - HostingFlow.com

619.254 (224.255)

Przenośnik ślimakowy

Overall dimensions:

  • width - 850 mm;
  • height - 2.550 mm.

Screw technical data:

  • screw diameter - Ø 250 mm;
  • screw stroke - 170 mm;
  • screw length - 2.900 mm;
  • screw gutter diameter - 280 mm;
  • motor - front, top;
  • motor power - 1,5 kW/63 U/min.

Discharge:

  • Discharge height from the floor - 2.000 mm;
  • discharge width - 280 mm;
  • discharge length - 280 mm.

Hopper:

  • Hopper height from the floor - 800 mm;
  • Hopper width - 800 mm;
  • Hopper length - 1.100 mm.

224 255 k


619.253 (224.253)

Selecting table with roll belt for vegetables and fruit

Overall dimensions:

  • length - 13.000 mm;
  • width - 2.500 mm;
  • height - 2.550 mm.

Technical data:

  • Selecting part (horizontal)
    • length - 7.400 mm (top);
    • length - 6.600 mm (bottom)
    • width (rolls) - 900 mm;
    • roll belt motor with gearbox - 3 kW/1.440 U/min.
  • Beginning inclined/oblique part of selecting belt:
    • length - 3.700 mm;
    • width (rolls) - 900 mm;
    • a shower for raw materials (over an inclined/oblique part);
    • hydraulic set for rising the beginning, movable part of the belt - 1,5 kW/1.440 U/min.
  • Bottom belt for out-sorts:
    • length - 7.000 mm;
    • width - 200 mm;
    • motor with gearbox - 1,1 kW/ 1.440 U/min.
  • Left and right platforms for workers;
    • length - 7.000 mm;
    • width - 600 mm.
  • Circulating pump - 2,2 kW/1.440 U/min.

224 253 k

224 253a k

224 253b k

224 253c k

224 253d k


619.252 (224.252)

Stainless steel mesh conveyor

Overall dimensions:

  • total length - 2.650 mm;
  • total width - 700 mm;
  • total height (without legs) - 550 mm.

Technical data:

  • belt working length - 3.250 mm;
  • belt working width - 400 mm;
  • mesh belt - stainless steel;
  • stainless steel belt weave wire - Ø 2,5 mm;
  • masive stainless steel construction;
  • sides height - 145 mm;
  • possibility of mounting 6 legs;
  • motor with gearbox;
  • possibility of mesh belt movement - right-left;
  • one side discharge to the bottom;
  • on the other side a limiter with a belt scraper;
  • completely stainless steel.

 


619.251 (224.251)

Horizontal conveyor with plain belt - painted

Overall dimensions:

  • length - 5.000 mm;
  • width (without motor) - 700 mm;
  • height (without legs) - 420 mm.

Technical data:

  • belt width - 435 mm;
  • working belt width (between sides) - 360 mm;
  • sides - stainless steel;
  • sides height - 65 mm;
  • belt carried on a sliding sheet;
  • additional lower belt tension + 1 belt supporting roll;
  • fastenings for 4 legs;
  • belt - reinforced PU;
  • construction - painted.


619.250 (224.250)

Modula stainless steel conveyor with storage hopper - 350 mm belt with flights

Overall dimensions:
  • Length - 3.600 mm;
  • Width - 1.600 mm;
  • Height - 2.550 mm.

Technical data:

  • Modular belt width - 350 mm;
  • Flights:
    • height - 70 mm;
    • distance between flights - 600 mm;
  • Bath dimensions:
    • length - 1.700 mm;
    • width - 1.500 mm;
    • height - 700 mm;
  • Motor - 0,75 kW/1.370 U/min.
  • Machine on the wheels:
    • 4 turning wheels, 2 fixed wheels;
  • Made of stainless steel.

216 53 k

216 53a k

216 53b k


619.249 (224.249)

Modular stainless steel conveyor with storage hopper - 1000 mm belt with flights

Overall dimensions:
  • Length - 3.600 mm;
  • Width - 1.750 mm;
  • Height - 2.400 mm.

Technical data:

  • Modular belt width - 1.000 mm;
  • Flights:
    • height - 25 mm;
    • distance between flights - 300 mm.
  • Bath dimensions:
    • length - 2.050 mm;
    • width - 1.700 mm;
    • height - 800 mm.
  • Motor - 0,55 kW/ 1.390 U/min.
  • Machine on the wheels:
    • 4 turning wheels, 2 fixed wheels.
  • Made of stainless steel.

216 54 k

216 54a k

216 54c k


619.248 (224.248)

Stainless steel screw conveyor with bath

Overall dimensions:

  • Total length – 4.200 mm;
  • Total width – 800 mm;
  • Total height – 1.400 mm.

Screw dimensions:

  • Length – 2.100 mm;
  • Screw pitch – 170 mm;
  • Screw diameter – Ø 200 mm.

Bath dimensions:

  • Length – 2.100 mm;
  • Width – 700 mm;
  • Depth – 300 mm.

Technical data:

  • Motor – 3 phases - 1,9 kW/1.400 U/min.;
  • Discharge height – 1.200 mm;
  • Infeed height – 700 mm.

224 248 k

224 248a k

224 248b k


619.247 (224.247)

Stainless steel screw conveyor

Overall dimensions:

  • Total length – 3.900 mm;
  • Total width – 550 mm;
  • Total height – 1.000 mm.

Screw dimensions:

  • Length – 3.200 mm;
  • Diameter – Ø 300 mm.
  • Pitch – 200 mm.

Technical data :

  • Gearmotor – 2,5 kW/1.440 U/min.

224 247 k

The picture before reconditioning


619.246 (224.246)

Stainless steel screw conveyor with sieve and drip tray

Overall dimensions:

  • Total length – 3.300 mm;
  • Total width – 500 mm;

Screw dimensions:

  • Length – 2.500 mm;
  • Diameter - Ø 250 mm.
  • Pitch – 160 mm;
  • Sieve along the screw.

Technical data:

  • Gearmotor – 2,2 kW - 1.440 U/min./80 U/min.

224 246 k

The picture of the machine before reconditioning


619.245 (224.245)

Screw conveyor in gutter - sainless steel

Overall dimensions:

  • Total length – 2.100 mm;
  • Height – 1.200 mm;

Technical data:

  • Motor - 0,5 kW / 1.440 U/min.
  • Constant trunovers;
  • Screw length – 2.000 mm;
  • Screw diameter – Ø 200 mm;

224 245 k


619.244 (224.244)

Conveyor with rubber grips for vertical transport of jars, cans, bottles, etc.

Overall dimensions:

  • Length - 2.750 mm;
  • Width - 1.150 mm;
  • Height - 2.750 mm;

Technical data:

  • Each row with its own motor;
  • Motor power - 2 x 0,37 kW;
  • Row width - 210 mm;
  • Space between rows - adjustable;

224 244 k

 224 244a k


619.243 (224.243)

Stainless steel belt conveyor

Overall dimensions:

  • Length – 5.650 mm;
  • Width – 600 mm;
  • Height – 1.050 mm;

Technical data:

  • Belt working length – 5.650 mm;
  • Belt working width - 300 mm;
  • Side height – 90 mm.

224 243 k


619.242 (224.242)

Stainless steel belt conveyor with back and sides walls and side protection net

Overall dimensions:

  • Total length – 2.450 mm;
  • Total width – 650 mm;

Technical data:

  • Belt working length – 2.000 mm;
  • Belt working width – 450 mm;
  • Back and sides walls height – 200 mm;

224 242 k


619.241 (224.241)

Belt conveyor with back and sides walls

Overall dimensions:

  • Total length – 1.500 mm;
  • Total width – 550 mm;

Technical data:

  • Belt working length – 1.250 mm;
  • Belt working width – 300 mm;
  • Sides walls height – 100 mm.

224 241 k


619.240 (224.240)

Stainless steel belt conveyor with one-side legs and adjustable height

Overall dimensions:

  • Total length - 2.600 mm;
  • Total width – 700 mm;
  • Total height – 1.100 mm;

Technical data:

  • Belt working length – 2.600 mm;
  • Belt working width – 500 mm;
  • PU belt.

224 240 k


619.239 (224.239)

Stainless steel belt conveyor with sides

Overall dimensions:

  • Total length - 2.600 mm;
  • Total width – 700 mm;
  • Total height - 1.250 mm;

Technical data:

  • Discharge height – 1.200 mm;
  • Minimum height – 300 mm;
  • Belt working length – 2.600 mm;
  • Belt working width – 400 mm;
  • PU belt;
  • Stainless steel construction.

224 239 k


619.238 (224.238)

Stainless steel belt conveyor with one-side legs

Overall dimensions:

  • Total length – 1.500 mm;
  • Total width – 700 mm;
  • Total height – 1.200 mm;

Technical data:

  • Belt working lenght – 1.400 mm;
  • Belt working width – 410 mm;
  • PU belt;
  • Stainless steel construction;
  • Gear motor - constant speed.

 224 238 k


619.237 (224.237)

Belt conveyor with flights and sides

Overall dimensions:

  • Total length – 4.500 mm;
  • Total width – 1.300 mm;
  • Total height - 2.800 mm.

Technical data:

  • Discharge height – 2.400 mm with up and down adjustement;
  • Belt working lenght – 4.800 mm;
  • Belt working width – 500 mm;
  • PU belt with flights;
  • Flight height – 45 mm;
  • Space between flights – 200 mm;
  • Gearmotor - 1,5 kW (constant speed);
  • Stainless steel and painted construction.

224 237 k

224 237a k


619.236 (224.236)

Belt conveyor with flights and sides

Overall dimensions:

  • Total length – 5.000 mm;
  • Total width – 1.900 mm;
  • Total height – 3.000 mm;

Technical data:

  • Discharge height – 2.700 mm with up and down adjustement;
  • Belt working length – 5.000 mm;
  • Belt working width – 500 mm;
  • PU belt with flights;
  • Flight height – 50 mm;
  • OSpace between flights – 200 mm;
  • Painted construction;
  • Gearmotor - constant speed.

224 236 k

 224 236a k


619.235 (224.235)

Belt conveyor with flights and sides

Overall dimensions:

  • Total length – 4.700 mm;
  • Total width – 1.700 mm;
  • Total height – 2.700 mm;

Technical data:

  • Discharge height – 2.300 mm;
  • Belt working length – 4.400 mm;
  • Belt working width – 500 mm;
  • PU belt with flights:
    • Flight height – 55 mm;
    • Space between flights – 200 mm;
  • Painted construction;
  • Gearmotor - constant speed.

224 235 k

224 235a k

224 235b k


619.234 (224.234)

Stainless steel modular belt conveyor "Cabinplant"

Overall dimensions:

  • Total length – 4.860 mm;
  • Total width – 900 mm;
  • Total height - 1.000 mm;

Technical data:

  • Belt working lenght – 4.700 mm;
  • Belt working width – 400 mm;
  • Discharge height – 850 mm;
  • Modular belt;

224 234 k

224 234a k


 619.233 (224.233)

Belt conveyor with back and sids walls

Overall dimensions:

  • Total length – 3.100 mm;
  • Total width – 550 mm;
  • Adjustable height – from 600 mm up to 900 mm;

Technical data:

  • PU belt;
  • Painted construction;
  • Gearmotor - constatnt speed;
  • Belt working length – 3.100 mm;
  • Belt working width – 320 mm;

224 233 k


 619.232 (224.232)

Conveyor type "Z" with modular, flight, wihte belt - CABINPLANT

Overall dimensions:

  • total length - 3.000 mm;
  • total width - 850 mm;
  • total height - 4.100 mm;

Infeed basket dimensions:

  • Length - 1.000 mm;
  • Width - 1.000 mm;
  • Depth - 500 mm.

Technical data:

  • Height to the discharge - 3.400 mm (adjustment possibility);
  • Height to the infeed (infeed basket) - 900 mm (adjustment possibility);
  • Modular belt with flights;:
  • Flight height - 75 mm;
  • Distance between flights - 100 mm;
  • Working belt lenght - 5.000 mm
  • Working belt width - 400 mm;
  • Gearmotor - 1,5 kW, constant speed;
  • Made of stainless steel;
224 231 k

224 231a k

224 231b k

224 231d k

224 231e k


 619.230 (224.230)

Inspection table with one-side plate conveyor - "Cabinplant"

Overall dimensions:

  • total length – 6.800 mm;
  • total width - 1.100 mm;
  • total height - 1.700 mm.

Technical data:

  • belt working length – 6.000 mm;
  • belt working width – 650 mm;
  • PU, flat belt;
  • Possibility of fixing top lamp over the main conveyor for easier inspection;
  • plate conveyor belt length - 6.700 mm;
  • plate conveyor belt width - 110 mm;
  • plate conveyor belt height – 900 mm (+/- 50 mm);

224 230a k

224 230 k


619.229 (224.229)

Flight conveyor type "Z" with modular belt

Overall dimensions:

  • total length – 3.000 mm;
  • total width – 950 mm;
  • total height – 2.600 mm.

Technical data:

  • Rising height– 2.200 mm;
  • Infeed height – 680 mm;
  • Belt dimensions:
    • width – 400 mm;
    • flight height – 75 mm;
    • space between flights – 250 mm;
    • modular belt;
    • constant speed.
  • Hopper dimensions – 800 mm x 400 mm x 300 mm.

224 229 k


619.228 (224.228)

Plate conveyors - different dimensions

Made of stainless steel, different length, adjustable width, possibility of mounting lines. For bottles, jars, cans, containers, etc. transportation. 


619.227 (224.227)

Screw conveyor with sieve

Overall dimensions:

  • total height - 2.840 mm;
  • total length - 3.300 mm;
  • total width - 1.200 mm;

Technical data:

  • screw length - 2.300 mm;
  • screw diameter - 250 mm;
  • screw stroke - 165 mm;
  • Infeed dimensions:
    • width - 800mm;
    • length - 920 mm;
    • depth - 680 mm.
  • Tank for water dimensions :
    • height - 400 mm;
    • width - 270 mm;
    • length - 620 mm;
  • Motor power - 2,2 kW; 1420 U/min / 80 U/min - gear.

224 227 k

224 227a k


 619.226 (224.226)

Tools table

Overall dimensions:

  • Width – 850 mm;
  • Length – 1.330 mm;
  • Height – 1.050 mm;

Technical data:

  • 4 wheels.

224 226 k


619.225 (224.225)

Tools table

Overall dimensions:

  • Width – 850mm;
  • Length – 1500 mm;
  • Height – 900 mm;

Technical data:

  • 4 wheels.

224 225 k


619.224 (224.224)

Multifunctional working table

Overall dimensions:

  • length - 1.220 mm;
  • width - 700 mm;
  • height - 1.000 mm.

Technical data:

  • container opening dimensions - 150 mm x 140 mm
  • number of openings - 12 pcs.
  • working table dimensions - 900 mm x 700 mm
  • container dimensions:
    • length - 600 mm
    • width - 245 mm

 224 224 k


619.223 (224.223)

Screw conveyor, mild steel, painted

Very strong constuction:

  • gutter made of 8 mm brass;
  • thick wall of screw;
  • screw flight made of 6,5 mm brass.

Overall dimensions:

  • length - 5.800 mm;
  • width - 370 mm;
  • height - adjustable;

Technical data:

  • Screw diameter – 300 mm;
  • screw stroke - 270 mm;
  • screw length – 5.500 mm
  • Infeed dimensions:
    • length – 260 mm;
    • width – 300 mm.

224 223 k

224 223a k

224 223b k

The pictures of the machine before reconditioning


619.222 (224.222)

Screw conveyor in pipe made of stainless steel

Overall dimensions:

  • length - 5.800 mm;
  • width - 500 mm;
  • height - adjustable.

Technical data:

  • Screw diameter – 300 mm
  • Screw stroke – 140 mm
  • screw length – 5.400 mm
  • inspection opening in the middle of conveyor
  • Infeed dimensions
    • width – 300 mm
    • length – 400 mm.
  • discharge dimensions:
    • width – 300 mm
    • length – 350 mm

224 222 k

224 222a k

224 222b k

The pictures of the machine during reconditioning


619.221 (224.221)

Sstainless steel bucket conveyor

Overall dimensions:

  • depth - 3.600 mm
  • width - 1.250 mm
  • total height - 4.050 mm

Technical data:

  • height to the discharge - 3.750 mm
  • bucket length - 520 mm
  • top bucket width - 120 mm
  • bottom bucket width - 55 mm
  • bucket depth - 95 mm
  • height from the floor lever to the top of infeed - 970 mm
  • infeed length - 920 mm
  • infeed depth - 100 mm
  • Manufacturer - UMELEC, France
  • Type - T-100 L 14
  • No - 611135M0-05
  • Power - 2,2 kW
  • Power supplly - 3 phases - 220/380 V/ 9,1/5,25 A/ 50 Hz
  • Turnovers - 1.435 U/min.

 


619.220 (224.220)

Belt conveyor with flights

Overall dimensions:

  • length - 7.100 mm 
  • width - 1.800 mm
  • adjustable height (start point) - 3.000 mm + additional adjustment - 1.500 mm
  • infeed at height of - 1700 mm

Technical data:

  • height adjustment motor:
    •    power - 0,55 kW;
    •    turnovers - 680 U/min.
  • belt motor:
    •   power - 0,75 kW;
    •   turnovers - 1.380 U/min.
  • modular belt with flights:
    • flight height - 50 mm;
    • belt length - 7.000 mm;
    • belt width - 400 mm.

224 220 k


 619.218 (224.218)

Stainless steel table (lazy Susan)

with rotary wheel and the round table for containers and overtop space for out of sort materials

Technical data:

  • Top table diameter with sides – 1.200 mm
  • Rotary table diameter – 1.600 mm
  • total table diameter – 2.060 mm
  • total height – 1.300 mm.

The picture of the table after reconditioning


619.216 (224.216)
Screw conveyor in gutter - made of stainless steel
 
Overall dimensions:
  • length - 4.300 mm
  • width - 1.570 mm
  • depth - 540 mm
Inlet dimensions:
  • length - 1.400 mm
  • width - 1.540/470 mm
  • depth - 1.000 mm.
Discharge dimensions:
  • length - 340 mm
  • width - 340 mm
  • discharge height - 2.050-2.150 mm

Technical data:

  • screw turnovers - 40 U/min.;
  • gutter width - 340 mm.













Picture of the machine after reconditioning

619.212 (224.212)

Lazy Susan

Overall dimensions:

  • total length - 1.120 mm
  • total width - 1.040 mm
  • total height - 840 mm

Technical data:

  • height to the top of table - 800 mm
  • table diameter - 1.000 mm
  • power - 0,2 kW.

224 212 k
The picture of the machine before reconditioning


619.211 (224.211)
Slat roller conveyor - zink

Slat roller coveyor cosists of multiple number of slats (with plastic wheels) fixed together in one frame. Number of slats depands on the width and length of whole conveyor.
Slats are made of zink steel, wheels are made of plastic and are fixed to the slat on steel rods.
The frame can be made of stainless steel or made of mild steel - depands on the customer.

Overall dimensions of 1 slat with rolls:
  • length - 2.415 mm
  • width - 43 mm
Single wheel dimensions:
  • width - 25 mm
  • diameter - 28 mm
Number of wheels in one slat - 72.


The picture of the machine before reconditioning


619.210 (224.210)
Mesh belt conveyor - with flights - stainless steel

Technical data:
  • belt length - 9.000 mm
  • belt width - 600 mm
  • space between flights - 700 mm
  • flight height - 80 mm.


The picture of the machine before reconditioning


619.209 (224.209)

Mesh belt conveyor - with flights - stainless steel

Technical data:
  • belt length - 5.500 mm
  • belt width - 600 mm
  • space between flights - 700 mm
  • flight height - 80 mm.


The picture of the machine before reconditioning


619.206 (224.206)
Mesh belt conveyor with gutter - stainless steel

Overall dimensions:
  • length - 2.100 mm
  • width - 450 mm
  • height - 950 mm

Technical data:

  • belt length - 2.000 mm
  • belt width - 150 mm.


The picture of the machine before reconditioning


619.202 (224.202)

Belt conveyor with sides - stainless steel

Overall dimensions:
  • length - 2.800 mm
  • width - 450 mm
  • adjustable height - 1.900 mm + 300 mm;

Technical data:

  • belt length - 2.700 mm
  • belt width - 300 mm.


The picture of the machine before reconditioning


619.200 (224.200)
Screw conveyor - stainless steel

Overall dimensions:

  • length - 2.100 mm
  • width - 300 mm
  • height - 600 mm

Technical data:

  • screw length - 2.000 mm
  • screw diameter - 180 mm.

224 200 k

224 200a k

224 200b k
The picture of the machine before reconditioning


619.199 (224.199)
Belt conveyor with flights - stainless steel

Overall dimensions:

  • length - 3.800 mm
  • width - 580 mm
  • height - adjustable

Technical data:

  • flight height - 100 mm
  • space beteen flights - 250 mm
  • side height - 200 mm
  • belt length - 3.700 mm
  • belt width - 400 mm.


The picture of the machine before reconditioning


619.195 (224.195)
Screw conveyor - stainless steel

Overall dimensions:

  • total length - 2.200 mm
  • total width - 1.100 mm
  • total height - 1.000 mm

Technical data:

  • screw length - 1.950 mm
  • screw diameter - 350 mm
  • infeed height - 400 mm
  • discharge height - 900 mm


The picture of the machine before reconditioning


619.191 (224.191)
Belt conveyor - stainless steel

Overall dimensions:

  • length - 2.100 mm
  • width - 700 mm
  • height - 2.750 mm

Technical data:

  • belt length - 2.000 mm
  • belt width - 350 mm
  • infeed height - 2.100 mm
  • discharge height - 2.650 mm.


The picture of the machine before reconditioning


619.165 (224.165)

Mesh belt conveyor with bath (construction for battering machine) - stainless steel

Overall dimensions:
  • length - 1.100 mm
  • width - 1.300 mm
  • height 1.500 mm

Technical data:

  • belt length - 1.100 mm
  • belt width - 1.000 mm.


The picture of the machine before reconditioning


619.158 (224.158)
Belt conveyor - stainless steel

  Overall dimensions:
  • length - 2.650 mm
  • width - 650 mm
  • height - 1.100 mm

Technical data:

  • belt length - 2.400 mm;
  • belt width - 150 mm.


The picture of the machine before reconditioning


619.152 (224.152)
Belt conveyor with flights - type L - made of stainless steel

Drawing of the conveyor and belt description (click)






Brand new conveyor - our construction


619.151 (224.151)

10-row plate conveyor - made of stainless

Overall dimensions:

  • length - 2.000 mm;
  • width - 910 mm;
  • adjustable height - 700-1.100 mm;

Technical data:

  • 10 rows stainless steel plate belts width 82 mm each.




The pictures of brand new conveyor - our construction


619.150 (224.150)
Screw stainless steel conveyor with thick wall

Overall dimensions:

  • total length - 6.690 mm;
  • total width - 520 mm;
  • total height - 3.780 mm;

Infeed overall dimensions:

  • length - 550 mm;
  • width - 450/250 mm;
  • depth at he biginning - 500 mm.

Technical data:

  • length from the infeed to discharge (straight on the ground) - 6.010 mm;
  • working length - 6.000 mm;
  • discharge height (adjustable) - 3.070 mm;
  • infeed height - 810 mm;
  • screw diameter - 130 mm;
  • Adjustment of discharge height (lower/higher);
  • made of stainless steel;
  • engine power - 1,1 kW.


The pictures of the machine after reconditioning

Drawing of the conveyor - side view (click)


619.149 (224.149)
Belt conveyor with flights

Overall dimensions:

  • total length – 6 000 mm;
  • toatl width - 490 mm;
  • total height – 700 mm;

Technical data:

  • Engine power  – 0,55 kW;
  • belt length – 5 900 mm;
  • belt width – 400 mm;
  • flight height – 50 mm;
  • space between flights 200 mm;

224 149 k

224 149a k

224 149b k

224 149c k
The picture of the machine after reconditioning


619.143 (224.143)

Rotating round buffer table

Overall dimensions:
  • total length - 1.400 mm;
  • total width - 1.030 mm;
  • total height - 970 mm;

Technical data:

  • table diameter - 1.000 mm;
  • sides around the table height - 80 mm;
  • Stainless steel table and sides;
  • lower cabinet with engine painted.

224 143 k


619.140 (224.140)

  Stainless steel flight conveyor with side flounce

Overall dimensions:
  • total length - 3.500 mm;
  • total width - 1.250 mm;
  • total height - 2.550 mm;
Technical data:
  • belt working length - 3.800 mm;
  • discharge height - 2.400 mm;
  • charge height - 600 mm;
  • transportation angle - 45°;
  • belt total width - 420 mm;
  • belt working width - 300 mm;
  • flights height - 80 mm;
  • space between flights - 450 mm.

224 140 k

224 140a k


619.135 (224.135)
Stainless steel screw conveyor

Overall dimensions:

  • Total length – 3.200 mm;
  • Screw length – 3.000 mm;
  • Screw diameter – 300 mm.

Hopper dimensions:

  • Diameter – 670 mm;
  • Depth – 330 mm;

Discharge dimensions:

  • Length – 300 mm;
  • Width – 270 mm.

Engine:

  • 2,2 kW;
  • 1.420 U/min.
  • Gear – Prerov Machinery TS 03 – nr. 03 89 - 106

619.132 (224.132)
Rotating round buffer table


Technical data:

  • Manufacturer - Soco System, Denmark;
  • Table diameter - 1.200 mm;
  • Height - 870 mm;
  • With three legs on wheels.
 

619.129 (224.129)

Screw conveyor with hopper "Ten Brink"

Overall dimensions:

  • total length - 3.100 mm;
  • total width - 1.320 mm;
  • total height - 1.880 mm;

Technical data:

  • screw diameter - 320 mm;
  • Completely made of stainless steel.

224 129 k

224 129a k


619.126 (224.126)

Drying/cooling conveyor, 3 belts

Overall dimensions:

  • total length - 6.550 mm;
  • total width - 950 mm;
  • total height - 2.000 mm;

Technical data:

  • conveyor's belt length - 3 x 5.900 mm;
  • conveyor's belt width - 3 x 750 mm;
  • bar belt - stainless steel;
  • space between bars - 15 mm;
  • vertical space between belts (space for product) - 130 mm;
  • complately stainless steel.
224 126 k

619.122 (224.122)

Overall dimensions:

  • length - 14,060 mm;
  • width -850 mm;
  • height - 950 mm;

Technical data:

  • electrical drum - 1.1 m /s;
  • power supply tension - 220 / 380 W;
  • power suppy current - 5,0/3,5 A;
  • type - B 343;
  • rubber belt;
  • belt length - 13,600mm;
  • belt width - 460 mm;
  • drivers height - 120 mm.


619.115 (224.115)

Roll conveyor

Overall dimensions:

  • length - 2.960 mm;
  • width - 620 mm;
  • height - 940 mm;

Technical data:

  • belt length - 2.960 mm;
  • belt width - 500 mm;


619.113 (224.113)

Roll conveyor

Overall dimensions:

  • length - 1,650 mm;
  • width - 1,400 mm;
  • height - 900 mm;

Technical data:

  • belt length - 1,050 mm;
  • belt width - 500 mm;
  • Turn - 900;
  • Fall - 300.


619.108 (224.108)

Net conveyor type S

Overall dimensions:

  • length - 2.950 mm;
  • width - 700 mm;
  • height - 950 mm;

Technical data:

  • belt length - 2.900 mm;
  • belt width - 250 mm;
  • Inlet angle - 60 degrees;
  • open-work net made of artificial material.


 619.99 (224.99)

Plate conveyor - turning back angle 150 degrees - plates type PP/PS

Overall dimensions:

  • length1 - 3,350 mm;
  • width - 2,100 mm;
  • height - 3,050 mm;

Technical data:

  • belt length - 4,560 mm;
  • belt width - 300 mm;

1Measured along the belt axis.


619.88 (224.88)
Line of hand tooling - chain conveyor

Overall dimensions:

  • length - 9,650 mm;
  • width - 1,750 mm;
  • height - 1,300 mm;

Technical data:

  • belt length - 9,450 mm;
  • belt width - 400 mm;


619.60 (224.60)

Conveyor with a rest for shifting standing bags

Overall dimensions:

  • Length - 3.900 mm;
  • Width along with a motoreducer - 970 mm;
  • Width without a motoreducer - 600 mm;

Technical data:

  • Belt's width - 400 mm;

224 60 k

Conveyor with a rest for shifting standing bags


619.57 (224.57)

BREYELL LOTCH type SMB 70.1.2.005 table for filling consumption products in cans, cups, jars etc, made in Germany


It's composed of 2 bottom edge conveyors with a polyurethane belt and a bottom central conveyor with a double lamellar belt. There are side working platforms attached to the table. It's also equipped with an upper magnetic conveyor for carrying empty cans and receiving them from its bottom part.


Overall dimensions:

  • Length - 10.430 mm;
  • Width without side tables - 1.135 mm;
  • Height - 2.070 mm;

Technical data:

  • Polyurethane belt conveyor's width - 240 mm;
  • Lamellar conveyor's width - 200 mm;
  • Upper magnetic conveyor's width - 270 mm.

BREYELL LOTCH type SMB 70.1.2.005 table for filling consumption products in cans, cups, jars etc, made in Germany


619.29 (224.29)

Plate conveyor, plastic belt, with 15° turns at the end of conveyor's both sides

Overall dimensions:

  • total length - 6.500 mm;
  • total width - 260 mm;
  • total height - 700 mm;

Technical data:

  • belt's width - 120 mm;
  • Made of stainless steel.

Apron conveyor, plastic belt, with 15° turns at the end of conveyor's both sides


619.27 (224.27)

Plate conveyor in reversed "S" shape

Overall dimensions:

  • total length - 6.700 mm;
  • total width - 1.100 mm;
  • total height - 900 mm;

Technical data:

  • engine power - 0,55 kW;
  • motoreducer with speed regulation;
  • made of stainless steel;
  • belt's working width - 180 mm.

Apron conveyor in reversed "S" shape


619.16 (224.16)
Stainless conveyor with plastic belt and approx. 35° turn, with wheels

Technical data:
  • belt length - 7.360 mm;
  • belt width - 300 mm;
  • height - 260 mm;
  • engine power - 0,37 kW, 1.375 r.p.m. with rotations regulation.



Stainless conveyor with plastic belt and approx. 35° turn, with wheels


619.15 (224.15)

Stainless steel conveyor with sides and full belt

Overall dimensions:

  • total length - 5.100 mm;
  • total width - 500 mm;
  • total height - 875 mm;

Technical data:

  • manufacturer - Stukenbröker Machinen und Anlagenbau GmbH, Bremenhaven, Germany;
  • belt working length - 4.930 mm;
  • belt working width - 250 mm;
  • sides height - 100 mm;
  • motor power - 0,7 kW.


619.14 (224.14)
Lamellar conveyor with plastic belt, stainless steel, straight

Overall dimensions:
  • length - 6.200 mm;
  • width - 550 mm;
  • height - 900 mm.
Technical data:
  • belt length - 6.000 mm;
  • belt width - 250 mm;
  • total width - 550 mm;



Lamellar conveyor with plastic belt, stainless, straight


619.11 (224.11)

"Turn" conveyor 180°, stainless steel

Overall dimensions:
  • length - 3.000 mm;
  • width - 1.800 mm;
  • height - 950 mm.
Technical data:
  • plastic lamellar belt;
  • belt length - 4.150 mm;
  • belt width - 110 mm;
  • slide width - 200 mm;



"Turn" conveyor 180°, stainless steel


619.9 (224.9)
"Turn" conveyor 90°, stainless steel

Overall dimensions:
  • length - 5.400 mm;
  • width - 860 mm;
  • height - 950 mm.
Technical data:
  • plastic openwork belt;
  • belt length - 4.800 mm;
  • belt width - 4.800 mm;
  • engine power - 0,55 kW.



"Turn" conveyor 90°, stainless steel


619.8 (224.8)
"Turn" conveyor 180°, stainless steel

Overall dimensions:
  • length - 4.650 mm;
  • width - 1.100 mm;
  • height - 1.600 mm.
Technical data:
  • belt width - 600 mm;
  • full length in turn - 4.500 mm;
  • height in the heighest point (in inlet) - 1.600 mm;
  • height at outlet - 1.060 mm;
  • Plastic lamellar belt.



"Turn" conveyor 180°, stainless steel


619.2 (224.2)

Bucket conveyor PK-65


The conveyor is used for feeding from one lever to another green beans seeds, beans, vegetables mix, berries, small fruits etc.

Overall dimensions:

Conveyor height H

a

h

l

l1

1.500

543

2.168

2.137

2.342

2.000

543

2.668

2.387

2.592

2.500

543

3.168

2.637

2.842

3.000

543

3.668

2.887

3.092

3.500

1.430

4.205

3.342

3.137

4.000

1.500

4.705

3.592

3.387

4.500

1.570

5.205

3.842

3.637

Technical data:
  • capacity - 6-10 t/h;
  • buckets speed - 0,59 m/sec;
  • lifting height 1-5 + 4,5m every 0,5 m;
  • engine type - Skf-80-4A, power - 0,55 kW, 1.400 rotations/min;
  • weight - 270-490 kg.



Bucket conveyor PK-65 pic. 1



Bucket conveyor PK-65 pic. 2

224 2 k

224 2a k

224 2b k

224 2c k
The pictures of the machine after reconditioning

Dru Samia Jersey Filip Forsberg Jersey