Steamer (pasteurizer, sterilizer) with continuous motion PP-02

Dimensions: * Total length – 18,400 mm * Total width – 1,300 mm * Total height – 2,330 mm Technical data: * Manufacturer – Eko-Prod Sp. z o. o., Pruszcz Gdański, Poland; * year of production – 2007; * Type – ZO J09Y11/6; * The machine consists of 3 sections: - loading section; - steam section consisting of two segments; - unloading section; * Length of the evaporation chamber – 12,000 mm; * Evaporation chamber width – 1,270 mm; * From the top, the steam chamber is covered with removable covers (20 pieces in total), and from the bottom it is closed with hinged covers (12 pieces in total); * The walls of the steam chamber as well as the upper and lower covers are filled with thermal insulation material; * The steam is distributed inside the steam chamber via steam collector consisting of a central pipe with a cross-section of approximately Ø 60 mm and side diffusers with a cross-section of approx. Ø 12 mm. There are 9 holes drilled in each diffuser with a cross-section of approx. Ø 2. In total, there are 32 diffusers in the entire steaming section. Steam is supplied in the central part of the chamber between the two segments of the evaporation section; * Steaming temperature – up to 100 °C; * Steam consumption – up to 200 kg/h at p=0.3 Mpa; * Compressed air pressure – 0.6 Mpa; * Time through the chamber adjustable – 12 – 45 min; * Capacity – up to 10,000 cans/h; * Maximum height of the steamed can – 80 mm; * Bar carrying belt - made of stainless steel rods Ø 8 mm; * Belt width – 1,150 mm; * Spacing between belt bars approx. 25 mm; * Drive power – 4.5 kW; * The entire device is made of stainless steel - type 304; * Operating mode – continuous; * Weight approx. 3,000 kg.