Sterilizer - 4-basket autoclave WSA 7 with fully automatic process

Sterilizer - 4-basket autoclave WSA 7

with fully automatic process It is used in the food industry for pasteurization and sterilization

of fruit, vegetable, meat and fish cans or other thermal operations. Dimensions: - Length - 4,670 mm; - Width - 2,016 mm; - Height - 1,950 mm. Technical data: - sterilization tank capacity - 3.41 m³; - basket capacity - 0.37 m³; - number of baskets for one loading - 4 pcs; - design pressure of the sterilization tank - 0.4 MPa; - design temperature - 151°C; - sterilization temperature - up to 132°C; - water temperature at the exchanger inlet - 10 - 12°C; - temperature of steam at the entrance to the exchanger - 164°C; - water pressure to the exchanger - 0.6 MPa; - Steam pressure to the exchanger - 0.6 MPa; - Air pressure to the tank - 0.4 MPa; - Air pressure for control - 0.6 - 0.8 MPa; - Water consumption - approx. 0.4 m³ / 8h; - Average steam consumption during the entire cycle - about 400 kg / h; - Maximum steam consumption during heating - approx. 1,500 kg / h; - Circulation water requirement for cooling - approx. 7 m³ / cycle; - Installed power - 4 kW; - JAD type heat exchanger (vertical); - The efficiency of the sterilizer as well as the consumption of steam, water and compressed air depends on the type of product subjected to sterilization, type and size of packaging and the technological process use; - Weight - 3.923 kg.

Characteristics of the automation system:

- automatic handling of the entire sterilization process

(from loading to unloading baskets from sterilization tanks);

- registration of all parameters of the sterilization process;

- visualization of computer processes;

- graphic operator panel enables ongoing analysis of the process carried out;

- alarming about exceeding the process parameters;

- central units of the control system equipped with their own non - volatile memory allowing for uninterrupted process registration

- the controllers memory can collect data from over a week of operation in the event of a computer or transmission line failure;

- battery voltage backup system ensuring the operation of controllers, including uninterrupted process registration in the event of a power failure;

- a system adapted to measure the temperature inside the chamber and calculate the F° parameter.